Building Engineering Services

From The HILLSIDE
Jump to navigation Jump to search

POLICY AND SERVICE CONTEXT

Overview

Many of the Building Engineering Services of a health facility have specialised needs within the context of healthcare provision and infection prevention and control. Specialist needs may include a combination of hygiene, redundancy and contamination-control requirements over and above the normal best engineering practice. The Building Engineering Services dealt with in this document include: ventilation systems, wet services, gas and vacuum services, electrical services and electronic services. The primary function of this document is to provide terms of reference to designers who are contacted to develop building engineering services systems. This document does not serve as a principal facility planning guide but as a best-practice guide within any planned level of healthcare service.

“This document describes engineering design, installation and commissioning principles in terms of current specialist clinical, contamination control and maintenance requirements“

Policy and Service Context

Context This document serves as guidance in the development of all levels of the healthcare facility. Certain sections may not be applicable to all considered levels of facility although, where a certain engineering service is supplied, that service shall be developed in accordance with the guiding principles contained herein. Design principles This document will detail design principles within the scope of services described in the Engineering Council of South Africa’s gazetted Guideline scope of services and tariff of fees in terms of the Engineering Professions Act (46 of 200). This document will also describe design, installation and commissioning principles in terms of current specialist clinical, contamination-control and maintenance requirements. While this document details design requirements and acceptance criteria which have an impact on clinical services, these requirements are prescribed within the framework of the entire IUSS set of guidance documents, and cannot be viewed in isolation. The following documents should be complied with, together with this document:

Within the South African healthcare context many clinical and administrative zones may be subject to infection-prevention and control measures with particular consideration for airborne contamination control.

Service Context

PLANNING AND DESIGN

Overview

Stages of design and implementation

Design Questions

Design considerations

Life cycle cost determination

Site-survey requirements

Maintenance Considerations

Planning for retrofitting& decommissioning

Sustainability & environmental measures

Design Life cycle

DESIGN SPECIFICATIONS

Design considerations

Heating ventilation and air-conditioning

Airborne-precaution risk classification for healthcare zones

Ventilation requirements

Natural ventilation

Mechanical ventilation and air-conditioning

Medical gas installations

Electrical installations

Electronic installations

Wet Services

Lifts

COMMISSIONING AND HANDOVER

Deliverables

Commissioning of ventilation systems

EXAMPLES

Mechanical system configurations

REFERENCES

LIST OF ABBREVIATIONS

LIST OF DEFINITIONS